Product ID:T S T, 211
MSDS Date:10/11/1990
FSC:8030
NIIN:00N012280
MSDS Number: BSXCP

Emergency Phone: 708-674-7700; 312-761-4500

Info Phone: 708-674-7700; 312-761-4500

Preparer: PAT FRASER

Cage: FO660

Telephone: 847-674-7700 OR 312-761-4500

Cage: 73165

POLYFUNCTIONAL ACRYLIC ESTER; (POLYFUNCTIONAL

ETHYLENE, TETRAFLUORO-, POLYMER; (TEFLON)

CAS: 116-14-3

RTECS: KX4025000

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE SKIN OR EYE IRRITATION,
ESPECIALLY AFTER PROLONGED OR REPEATED CONTACT IN SENSITIVE
INDIVIDUALS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE OXYGEN/ARTIFICIAL RESPIRATION) . EYES:FLUSH
WITH TEPID WATER FOR AT LEAST 15 MINUTES HOLDING EYELIDS APART,
GET MEDICAL ATTENTION. SKIN:WASH WITH SOAP AND WATER. IF IRRITATION
OCCURS, GET MEDICAL ATTENTION.

Flash Point:SUPDAT
Extinguishing Media:USE WATER FOG, DRY CHEMICALS, FOAM, CO*2.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . USE EYE PROTECTION.
Unusual Fire/Explosion Hazard:EXCESSIVE HEAT MAY CAUSE RAPID
POLYMERIZATION, RESULTING IN CONTAINER RUPTURE.

Spill Release Procedures:WIPE UP WITH RAGS OR ABSORB WITH INERT
ABSORBENT MATERIAL. COMPLETE CLEANUP WITH WATER OR DETERGENT AND
CHLORINATED SOLVENT CLEANER WITH ADEQUATE VENTILATION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:USE NORMAL STORAGE AND HANDLING. STORE
AWAY FROM EXCESSIVE HEAT WHICH MAY SHORTEN SHELF LIFE.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. PRODUCT CONTAINS
TEFLON. AVOID CONTAMINATION OF TOBACCO AND SMOKING PRODUCTS. AFTER
HANDLING, WASH THOROUGHLY BEFORE SMOKING, EATING AND DRINKING.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN . NONE REQUIRED WITH ADEQUATE VENTILATION.
Ventilation:LOCAL/MECHANICAL EXHAUST ACCEPTABLE.
Protective Gloves:IMPERVIOUS POLYETHYLENE GLOVES. (SUPDAT)
Eye Protection:ANSI APRV CHEMICAL WORKERS GOGGLES (FP N
Other Protective Equipment:COVERALLS OR APRON MAY BE USED TO HELP AVOID
CONTACT AND MAINTAIN CLEANLINESS. DO NOT USE PVC OR ABS PLASTIC.
Work Hygienic Practices:USE NORMAL GOOD HOUSEKEEPING PRACTICES.
Supplemental Safety and Health
BP:N/A. POLYMERIZES ABOVE 200F. FL PT:NONE. POLYMERIZES ABOVE 200F.
PROT GLOVES:DO NOT USE PVC OR ABS PLASTIC.

HCC:N1
Boiling Pt:B.P. Text:SUPDAT
Vapor Pres:NEGLIGIBLE
Spec Gravity:1.12 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:OFF-WHITE PASTE, MILD PLEASANT ODOR.

Stability Indicator/Materials to Avoid:YES
AVOID STRONG OXIDIZING OR REDUCING AGENTS (IE, PEROXIDES,
PERMANGANATES, ETC.)
Stability Condition to Avoid:EXPOSURE TO TEMPERATURES ABOVE ROOM
TEMPERATURE MAY ADVERSELY AFFECT SHELF LIFE.
Hazardous Decomposition Products:PYROLYSIS MAY YEILD CO, CO*2,
PERFLUOROHYDROCARBONS & INCOMPLETELY BURNED HYDROCARBONS.
Conditions to Avoid Polymerization:ABOVE 200F MATERIAL WILL UNDERGO
RAPID POLYMERIZATION.

Waste Disposal Methods:USE CONTROLLED INCINERATION OR BURY IN A POSTED
LANDFILL IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.